Dipstick tube bolt (1x) - Final Torque: All 450 & 452: 12Nm 9Nm: Sump drain plug: All 451: 65Nm: Cam Shaft Applicable Models Torque; Camshaft sprocket bolt (1x) All 450 & 452: 21 Nm + 90°+ 10° Camshaft cap bolt (2x per cap) - Initial Torque Camshaft cap bolt (2x per cap) - Final Torque: 450 599cc engines only: 11Nm 8.4Nm: Camshaft cap bolt The bolts, at the least, should be replaced, and thread locking compound used (Permatex Orange works well and still comes apart without heat). Front bolt = Step 1: Tighten to 111 Ft. Lbs. (150 Nm). Step 2: Turn additional 90 degrees (this equals approximately 170 Ft. Lbs. of torque on the bolt). This is also torque-to-yield, and the nut is All-In-One Torque Spec List. I had some time on my hands and got tired of repeatedly digging through the service manual for torque specs, so I compiled this list of every torque specification I could find. I thought others in the community might find it helpful. Tighten in a star pattern, 2 turns at a time. Ford Model: fusion. Ford Year: 2005. UK/Ireland Location: Lanarkshire. Posted February 2, 2013. Hey Guys. just beenn having a look at my rear brakes, but my torque wrench measures in Ft Lbs (25<250) increments of 25Ft lbs or Mkg (3.5<34.5) can anyone tell me the correct torque in Ft lbs. any help very much Appreciated. Torque: 1: 85 lb.ft (115 Nm) 6x big bolts. 2: 18 lb.ft (25 Nm) 2x small bolts, exhaust hanger. --. From the looks of the rear subframe in this service manual, the design of the locating pins and are near identical to that of vehicles I've worked on in the past. As long as those pins are located, and you've got the bolts installed, the subframe Barbel330 wrote: Could anyone please confirm what the torque setting should be for an injector clamp bolt on my 2012 1.6tdi please? I've read 2 different things, 7nm + 180 degrees & 8nm + 270 degrees. I've googled it but can't find a definitive answer. Thanks. I went for 7nm + 270 degrees . Torque Settings. Download the relevant PDF document to get instructions and torque settings. DAIHATSU DL/DG - 1001 1001. FORD/MAZDA WEC - 1005 1183, 1105 1193. FORD/MAZDA WL/WLT - 1005 1024, 1105 1077. FORD/MAZDA FE/F8 - 1005 1022, 1105 1257. FORD/MAZDA G5/G6 - 1005 1023. FORD/MAZDA SL/SLT - 1005 1092. Head Bolt Torque For your 1994 Oldsmobile Cutlass Supreme (3.4L SFI DOHC): Foot pounds (Final torque) Note: Torque sequence --------- | 6 2 3 7 | | 5 1 4 8 | --------- Step 1: torque in sequence to 33 Ft/Lbs Step 2: turn an additional 90 degrees Recheck final torque in sequence *** CAUTION ***engine uses Torque To Yield head bolts (TTY Vay Tiền Trả Góp Theo Tháng Chỉ Cần Cmnd.

ford focus 1.6 torque settings